409--10070
Customer Manual
Latch Head
1
of 8
LOC B
E
2011 Tyco Electronics Corporation, a TE Connectivity Ltd. Company
All Rights Reserved
*Trademark
TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product and/or Company names may be trademarks of their respective owners.
TOOLING ASSISTANCE CENTER
1--800--722--1111
This controlled document is subject to change.
For latest revision and Regional Customer Service,
visit our website at
www.te.com
13 JUL 11 Rev D
Battery Powered Crimp
Tool Kit 1901343- [ ]
READ THIS FIRST !
2
. . . . . . . . . . . . . . . . . . . . . . . . .
SAFETY PRECAUTIONS
1. INTRODUCTION
5
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2. RECEIVING/INSPECTION
5
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3. INSTALLATION OF DIES
5
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.1. Installation of Die Assemblies
5
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.2. Removal of Die Assemblies
6
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4. OPERATION
6
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.1. Battery Installation and Removal
6
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.2. Crimping
7
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5. PREVENTIVE MAINTENANCE
8
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.1. Daily Maintenance
8
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.2. Yearly Maintenance
8
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6. ADJUSTMENTS
8
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7. ADJUSTMENTS
8
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8. TROUBLESHOOTING
8
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9. REVISION SUMMARY
8
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Safeguards are designed into this application equipment to protect operators and
maintenance personnel from most hazards during equipment operation. However,
certain safety precautions must be taken by the operator and repair personnel to
avoid personal injury, as well as damage to the equipment. For best results,
application equipment must be operated in a dry, dust--free environment. Do not
operate equipment in a gaseous or hazardous environment.
Carefully observe the following safety precautions before and during operation of
the equipment:
D
ALWAYS wear appropriate ear protection.
D
ALWAYS wear appropriate eye protection.
D
ALWAYS wear approved eye protection when operating powered equipment.
D
ALWAYS keep guard(s) in place during normal operation.
D
NEVER wear loose clothing or jewelry that may catch in moving parts of the
application equipment.
D
NEVER insert hands into installed application equipment.
D
NEVER alter, modify, or misuse the application equipment.
ORI
G
INAL
IN
STRUCTI
O
NS
