IPmux-24
TDM Pseudowire Access Gateway
GENERAL
Timing
Internal
Loopback
Adaptive
External input or output via optional
dedicated RJ-45 port: E1/T1 or
2048/1544 kHz squarewave (RS-422
electrical levels)
Management
SNMPv1, SNMPv3
Telnet
RADview Service Center TDMoIP (ordered
separately)
ASCII terminal via V.24 (RS-232) DCE port
Diagnostics
E1/T1 local loopback
E1/T1 remote loopback
Facility Type 1 (FAC1) inband loopback
CSU loopback as per Telecordia GR-54
Statistics
E1/T1 (per G.826 and RFC 2495)
Ethernet (per RFC 2819)
Jitter buffer indication (overflow,
underflow, sequence error)
Alarm Relay
Via pin 6, pin 7 and pin 8 of the EXT. CLK
connector (RJ-45), optional
Indicators
PWR (green) – Power status
TST/ALM (red/yellow) – Test/alarm status
E1/T1 SYNC (green/red) – E1/T1
synchronization status
LINK/ACT (green) – Ethernet link/activity
status
EXT. CLK (red/green) – External clock
status
Power
AC/DC: 100–240 VAC, 50/60 Hz
or
48/60 VDC nominal (40 to 72 VDC)
DC: 24/48/60 VDC nominal (18 to 72 VDC)
Power Consumption
12W max
Physical
Height: 47 mm (1.8 in)
Width: 215 mm (8.4 in)
Depth: 147 mm (5.8 in)
Weight: 0.7 kg (1.5 lb)
Environment
Temperature:
IPmux-24: 0 to 50°C (32 to 122°F)
IPmux-24/H: -30 to 65°C
(-22 to 149°F)
Humidity: Up to 90%, non-condensing
Carrier-grade voice
quality without
compression, or
silence suppression
