TDK TREK 360 Скачать руководство пользователя страница 1

Страница: 1 / 3

TREK 360 Battery Replacement Instructions

Caution: Disconnect the TREK 360 power and place the power switch on the rear

of the unit in the OFF position before beginning the replacement.

1. Place the unit on its left side. Using a
T-5 Torx driver, remove the four screws
holding the battery cover plate.

2. Place the unit upright. With a
jeweler’s screwdriver or a tweezers,
carefully pry out the battery cover
plate.

3. The battery compartment.

Содержание TREK 360

Страница 1: ...ar of the unit in the OFF position before beginning the replacement 1 Place the unit on its left side Using a T 5 Torx driver remove the four screws holding the battery cover plate 2 Place the unit up...

Страница 2: ...a screw driver lift on the lower corner of the battery assembly and rotate upwards The battery will not lift straight up 5 Lift the battery out 6 Using fingers or a needle nosed pliers unplug the con...

Страница 3: ...and replace the battery cover 9 Reinstall the four retaining screws Proper disposal of the old battery is essential from an environmental and safety point of view Please follow local regulations for p...