TDK-Lambda GH10-150, Руководство по безопасности и установке продукта

Страница: 8 / 70

4
SAFETY & EMC APPROVALS
SAFETY/EMC Approvals
UL 60950-1 and CSA22.2 No.60950-1 - UL Listed. C-UL for Canada.
IEC 60950-1 - CB Report and Certificate.
EN 60950-1 - CE mark.
IEC/EN 61204-3 - Industrial environment.
Marking of the CE symbol indicates compliance to the EMC Directive and the Low Voltage Directive of the
European Union.
A “Declaration of Conformity” in accordance with the preceding directives and standards has been made and
is available on a file at our EU representative TDK LAMBDA Germany GmbH, Karl-Bold-Str. 40, Achern.
A “Declaration of Conformity” may be accessed via company web site:
https://www.emea.lambda.tdk.com/uk/technical-data/data.aspx?resource=Safety-Certification
WARNING
This product is designed for an industrial environment. In a residential, commercial or light industrial
environment it may cause radio interference. The user may be required to take adequate measures
to reduce interference.
NOTE
This product is a professional equipment, which is not intended for sale to generic public.
FCC Notice
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
NOTE
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy. If not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense.
WARNING
Modifications not expressly approved by the party responsible for compliance could void the users’
authority to operate the equipment under FCC Rules.