TD Freedom V, Руководство пользователя

Страница: 18 / 42

27 26
rePortS
There are several report options available in this terminal. Reports can be made on detailed transactions for the
current business day and the previous business day.
Menu Access F Business Day Business Day Reports
Business Day rePorts
These reports are for transactions performed in the current business day regardless of the number of
batches that were closed.
T
erminal
D
eTail
Provides a report by card type on the details of the transactions done in the current business day.
T
erminal
B
alancing
Provides a report on the overall totals by card type for the transactions done within the current business
day.
D
ay
S
uBToTalS
Provides a report on the overall subtotals by card type for the transactions done within the current
business day.
o
peraTor
D
eTail
Provides a report by operator ID and by card type on the details of the transactions done in the current
business day.
o
peraTor
B
alancing
Provides a report by operator ID on the overall totals by card type for the transactions done within the
current business day.
p
re
-a
uTh
/T
aB
S
TaTuS
Provides a report on the status of all transactions initiated by a pre-auth / tab transaction.
o
pen
p
re
-a
uTh
/o
pen
T
aB
Provides a report on all pre-auth / tab transactions that have not been completed.
T
ip
T
oTalS
Provides a report by operator ID on all tips obtained from transactions on the terminal.
o
uTSTanDing
SaF
Provides a report on all stored transactions that have not been sent to the Host for settlement.
c
aShBack
T
oTalS
Provides a report on the total Cashback amount processed through the terminal.
hoSt tranSaCtionS
Menu Access F Business Day Host Transaction
BatCh suBtotals
Communicates with the host to verify that the totals at the Host match those on the terminal for the
current batch.
Note: This function is not necessary for merchants on Auto Batch Close.
BatCh Close
Communicates with the host to close off the current batch of transactions
Note: This function is not necessary for merchants on Auto Batch Close.
senD offline
Sends any transaction done in Offline Mode to the Host for authorization.
Important: This function automatically turns on the modem when selected. The terminal must be in
a modem active area in order to be used. Once the function is completed the modem will
be deactivated automatically.