7
05/2006
Additional functions
Name plate illumination
Via LED, P-wire connection required.
Connection
•
for Service Device
•
for connection for bell button extension PET/PDT
•
for protection ground
Allocation of serial number to
bell buttons
2
additional switching signal
Use a combining device BRE2.
Assembly
Installing the video front-door station
Installation location
To achieve a good video quality the camera
must not point directly at:
•
sunlight,
•
strong sources of light,
•
bright or strongly reflecting walls.
Installation height
The installation height for the video front-
door station must be selected under consid-
eration of the field of capture of the camera
(see figure). Persons with average body
height are best captured with an installation
height of 160 cm above floor level.
3.7 mm lens
90 ° diagonal capture angle
TCS TürControlSysteme AG
•
Geschwister-Scholl-Str. 7
•
39307 Genthin
Subject to change without notice.
Phone.: +49 39 33 / 87 99 10
•
Fax: +49 39 33 / 87 99 11
•
www.tcs-germany.com
PI_GB_VPES_VPDS_Art0016079_2v0.doc
mi
