5
2800 Laura Lane
•
Middleton, WI 53562
|
800.288.9383
|
www.tcsbasys.com
4
5
Configuration
1 2 3 4 5
ON
1
2
ON
R W/Y1 W/Y2 G
Y2
G
GND
A1
A02 A01
A2
DI1
A
B
REF
+
–
24V
DI2
DI3 OVR T1 T1
T2 T2 T3 T3
Programming Keypad Access
The keypad can be configured to restrict access to the Programming Setup and Clock and Schedule functions. You can
control the access to either function by configuring the keypad dip switches on the inside of the front cover as shown.
Cover
(Inside)
Keypad Dip Switch Settings
The dip switch panel controls access to clock,
schedules, and programming.
1
2
ON
Access to
PROGRAM
SETUP and
CLOCK SETUP
(Default)
1
2
ON
Access to
PROGRAM
SETUP only
1
2
ON
No access to
PROGRAM
SETUP and
CLOCK SETUP
1
2
ON
Access to
CLOCK SETUP
only
Keypad Button Functions
fan
switch
Press to change fan
speed and system
modes (when
enabled)
Press to raise or
lower temperature
settings when
OCCUPIED LED is on
system
switch
program
setup
Press to change
fan thermostat’s
program or
temperature setback
times (when
enabled)
OVERRIDE
Press when
OCCUPIED LED is off
to restore occupied
temperature settings
clock
setup
service
status
Press to review
service screens
Keypad
service
status
fan
switch
system
switch
program
setup
clock
setup
OVERRIDE
COOLER
WARMER
Occupied
Heating
Cooling
Fan
Service
Data/
Program
Navigating Via Keypad
All settings on the SuperSTAT can be made via the keypad. Each screen will display the name of the setting, a selection
option, and current values for that screen, which will flash to indicate which is active. Pressing the WARMER button will
increase the value or advance the active setting to the next option on the screen; pressing the COOLER button will reverse
the process. For screens with multiple values (e.g., date setup), pressing the OVERRIDE button will advance you to the
next value. After adjusting the values, press the PROGRAM SETUP or CLOCK SETUP button again to save the values and
advance to the next screen.
NOTE:
Press and hold the PROGRAM SETUP, CLOCK SETUP, WARMER, or COOLER buttons in order to scroll through
screens and values more quickly. Press the SERVICE STATUS button to exit PROGRAM SETUP Mode or CLOCK SETUP
Mode and return to the main screen.