2800 Laura Lane • Middleton, WI 53562 | 800.288.9383 • fax: 608.836.9044 | www.tcsbasys.com
27
2800 Laura Lane • Middleton, WI 53562 | 800.288.9383 • fax: 608.836.9044 | www.tcsbasys.com
27
Appendices
Appendix C: Monitor and Keyboard
The QD2040c can be configured locally at the device using a keyboard and monitor. If using this method of configura
-
tion, you will need:
•
Monitor with HDMI or DP(DisplayPort) connection (depending on your monitor, you may need a VGA-to-HDMI/DP
adapter).
•
HDMI-to-HDMI cable or DP-to-DP cable.
• USB Keyboard.
Connection Setup
1.
Connect the cable to the monitor and to the QD2040c, matching up the corresponding ends (HDMI, DP). (See
“QD2040c Power and Communication Connections” on page 4.
) Power on the monitor and switch to the prop-
er input, based on the cable used.
2. Plug the USB cable into a free USB port on the QD2040c. Test keyboard connectivity by pressing Caps Lock to
see if the LED on the keyboard illuminates.
3. Reboot the unit by pressing and holding the Power button until the unit turns off. Release the Power button and
press it again to power the unit back on. This will cause the unit to recognize the monitor and keyboard.
4.
Configure the QD2040c as needed. (See
