7
11/2012
TCS TürControlSysteme AG, TCS Hotline Germany: +49 (0) 41 94/ 9 88 11 88
Subject to technical changes.
FAX: +49 (0) 41 94/ 9 88 129
Mail: [email protected]
PI_PUK-uk 1 A
Wiring example
When using several front-door stations within one system:
Use the R-terminal to connect a door release relay.
2-wire special operation
In this operation mode, only one front-door station can
be connected! One P-wire is to be build by a jumper
between terminal a and P.
Note: The front-door station is not working, if the jumper is set at
b instead at a.
Commissioning
Install the devices of the system completely.
Check the a, b and P wire against each other for short-circuits.
Switch on the mains voltage.
