6
07/2012
TCS TürControlSysteme AG
Subject to technical changes.
E-
Mail: [email protected] • www.tcsag.de
PI_home-packs-uk.doc 1A
Commissioning
Install the devices of the system completely.
Check the a-, b- and P-wire against each other for short-circuit.
Switch on the mains voltage.
Settings
ISH3130 and ISW3130
ISH3130 and ISW3130 are in 2-wire operation when delivered and do not need to be con-
figured if the connection is realised according to the wiring example.
Further settings
Please see product information of the package components.
Configuration options
With the comfort indoor stations, an internal call is possible. This function is not pre-
configured. With the Service Device or the configuration software configo
™, an internal
call can be programmed.
Please see product information of the indoor station.
Labeling the name plate glass
Please see product information of the front-door station.
Programming bell buttons
The comfort indoor stations are allocated to the bell buttons ex works and do not need to
be programmed. If an indoor station has to be replaced, please take the information for
programming the bell buttons from the product information from the product information of
the comfort indoor station (repair) or front-door station.
Repair
Please see product information of the indoor station and front-door station.
