PI_GB_PES_PDS_Art0015689_1v0.doc 9
10/2005
Commissioning
•
Fully install the devices of the system.
•
Check the a and b wires for short circuits.
•
Connect the power supply and control units to the mains voltage.
Switch on the mains supply.
Microphone and loudspeaker volume setup
!
For adjustments use the small screwdriver supplied!
Volume control
microphone
In-house
station
volume
adjustment
loudspeaker
Front-door station
volume
adjustment
The volumes have been set to an average value
at factory. A modification may not always be
necessary.
When adjusting please note:
The amplification of loudspeaker and microphone
cannot be set independently from each other.
Too great volume will cause a feedback effect
(whistling).
Nameplate labelling
The templates are available on our website
\ English\ Downloads \
System and technology basics\ Product installa-
tion and use \ labelling of the nameplate
1.
Enter the desired name into the template.
2.
Print the name plate on the special film* and
cut it to size.
3.
Loosen the pockets at the outer edge of the
name plate glass using the insertion aid sup-
plied.
4.
Insert the cut plates from the side into the po-
ckets on the name plate glass.
*
We recommend to print the name plates on a durable special
film
.
The film can be ordered directly from TCS: Writable poly-
ester film for name plates DIN A4.
TCS TürControlSysteme AG
•
Geschwister-Scholl-Str. 7
•
39307 Genthin
Subject to change without notice.
Phone: +49 39 33 / 87 99 10
•
Fax: +49 39 33 / 87 99 11
•
www.tcs-germany.com
Art.Nr. 0015689 Version 1.0 mi
