10
01/2013
TCS TürControlSysteme AG, TCS Hotline Germany: +49 (0) 41 94/ 9 88 11 88
Subject to technical changes.
FAX: +49 (0) 41 94/ 9 88 129
Mail: [email protected]
PI_K30001-30004_uk 1A
Mounting and installation
The installation is realised on a concrete foundation provided by customer with heavy load
anchors (encluded in the delivery).
Appropriate space for installation (back of the post) must be guaranteed at the installa-
tion site!
We recommend a provided cable length of 1 m.
Please observe when using front-door stations with camera module or dome cam-
era module
Requirements for the installation site:
Harmful environmental conditions can reduce the durability or can cause malfunctions.
Do not install the camera module on sites, where it is directly exposed to rain. Water
droplets on the dome or the viewing window can impair the image quality.
Do not install and operate the camera module on sites with:
strong dust and dirt formation,
water vapour or oil clouds (e.g. kitchen),
direct solar radiation,
unsuitable ambient temperatures (see technical data),
strong sources of radiation (e.g. x-ray radiation, radio stations or magnetic fields),
corrosive gases or salt water.
Install the post
Use the base of the post as stencil.
Place the heavy duty anchor (encluded in the delivery).
Insert the connection cable provided by customer through the base plate.
!
Observe that one line must be available for the functional earth.
Tighten the post with the 4 cylinder screws with hexagon socket screw M10 x 75
(encluded in the delivery).
!
Ensure that the connection line provided by customer is not clamped or damaged!
