08/2012
15
TCS TürControlSysteme AG
Subject to technical changes.
E-
Mail: [email protected] • www.tcsag.de
PI_ISH3230-uk 2A
1
Initiate
power supply and control unit
shortly press
LED blinks
programming mode of the system is switched ON
2
Delete a button
a)
Press until the delete-tone melody sounds
1)
release
3
Programming via voice connection
or
establish voice connection
to the front.door station
2)
shortly press
the button
... a ring tone sounds at the front-door
and indoor station
1)
4
End
shortly press LED is ON
programming mode of the system is switched OFF *
)
a) Not necessary, if the bell buttons have not been programmed, comp. product information of the front-door station.
1) If there sounds a Progsperr tone instead, the front-door station is equipped with a programming lock.
The programming lock can be deactivated only with the Service Device TCSK-01 or the configuration software
configo
™
2) New developed front-door stations (as of 2009) respond to that with a positive acknowledgement, if the serial number
of the indoor station was received (see product information of the front-door station).
*)
for device specific indication modes of the front-door station see product information of the front-door station
Cleaning
!
Avoid water from entering the device!
Do not use any abrasive detergents!
Clean the device with a dry or slightly moist cloth.
Remove stronger stains with a mild plastic cleaner.
