TCS FIL1101-0140, Информация о продукте, Страница: 17 / 20

05/2013 17
TCS TürControlSysteme AG, TCS Hotline Germany: Subject to technical changes.
FAX: +49 (0) 41 94/ 9 88 129

Mail: hotline@tcsag.de FIL1101 UK 1A mi
Load factory settings
!
Attention! When loading the factory settings, the master code and all settings set by
the user will be lost.
Initiate
programming
If not yet done
enter
…
* 99 # master code # master code #
master code = number with 6 digits (own mas-
ter code or default master code)
Correct master code
has been entered.
Factory setting is
loaded.

The factory setting is loaded.
A positive acknowledgement tone sounds,
the red LED is ON for 3 s.

Then the red LED blinks.
incorrect entry, un-
known master code A negative acknowledgement tone sounds
when pressing the #-key.
The red LED blinks fast for 3 s,
then blinks again.
End programming
enter
or
wait
ended
* 9 #
or

there is no programming for 2 min.

A positive acknowledgement tone sounds,
the red LED is ON for 3 s.
the red LED expires.
Note:
If the ring tone mute had been OFF, the red
LED is ON again as soon as the programming
mode is exited. This function is indicated
again.
Programming with Service Device TCSK-01
Configure signal unit FIL1101
programming parallel allocation 1 * 40 # Ser-No # ParSNo #
programming parallel allocation 2 * 41 # Ser-No # ParSNo #