TCS FIL1101-0140, Информация о продукте, Страница: 11 / 20

05/2013 11
TCS TürControlSysteme AG, TCS Hotline Germany: Subject to technical changes.
FAX: +49 (0) 41 94/ 9 88 129

Mail: hotline@tcsag.de FIL1101 UK 1A mi
Parallel allocation to serial numbers 1 and 2

Further (sub) indoor stations or signal units can be allocated to a main indoor station
(indoor station with handset or for simplex communication). When the main indoor sta-
tion is called, also the signal unit chimes. A direct call to the sub-indoor station or the al-
located signal unit is not indicated at the main indoor station.

If there are more than 2 devices connected in parallel, all devices must be supplied by
P-wire (3-wire operation).

The FIL1101 can be allocated to two different indoor stations (parallel serial numbers 1
and 2).
Initiate
programming
If not yet done
Enter
…
…
* 11 # SNo 1 #
* 12 # SNo 2 #

SNo 1 and 2: 0 to 999999 (WE* = 0)

If SNo = 0 is entered, parallel allocation is
deactivated.
(SNo = serial
number of
the indoor
station)
Indoor station with this
serial number has
been found

a positive acknowledgement tone sounds,
red LED is ON for 3 s.

then LED red blinks.
The FIL1101 is allocated parallel to the indoor
station.

incorrect serial
number

SNo is already allo-
cated
A negative acknowledgement tone sounds
when pressing the #-key.
The red LED blinks fast for 3 s,
then blinks again.
* WE = factory setting
Select sound profile and ring tones
For 8 different incoming calls (door call from 2 different front-door stations, floor call, inter-
nal call, sub-door calls 1 to 4) different ring tones can be selected.
Initiate
programming
If not yet done
sound profile selec-
tion
enter
* 20 # sound profile #
sound profile
(WE = 1)
= 0 ISH1030
= 1 ISH3030
= 2 Skyline