02/2014
13
TCS TürControlSysteme AG, TCS Hotline Germany: [email protected]
Subject to technical changes.
www.tcsag.de
PI_FBI610x_uk 3 A
Configure the phonebook
In this menu a TCS:BUS serial number is connected to a SIP telephone number which is
to be called.
Register under
Phonebook
.
Enter the required call
destinations for your
connected front-door
station.
Click
Save
.
Phonebook FBI610x-0400
with up to 10 resp. 115 call
numbers.
!
The Reset button resets the content to the latest stored data state. It does not reload
the factory settings.
Column
Function
name
This text is used only to inform the installer resp. for a better assignment of call number and
serial number to a resident or a flat. This text is only displayed here. This field is mandatory
and must be filled out. Otherwise the entry is inactive.
number
Entry of the selected SIP telephone numbers without special characters.
serial number
TCS:BUS serial number, which is to be programmed at the front-door station. The serial num-
ber has max. 6 digits. Shorter serial numbers are entered and displayed without leading ze-
roes. A pseudo serial number or a parallel serial number can be used.
incomming
Decision, how to react in case of an incoming call of the corresponding number. The following
can be selected: rejecting, automatic acceptance, automatic acceptance with playing a stored
announcement (the caller can hear it) and manual acceptance. The additional opti
on “beep“
ensures that conversation partners hear a signal tone after the audio connection is established.
outgoing
Decision, if in case of an outgoing call, a stored announcement (e.g. position of the communi-
cation system) should be played for the caller.
group ID
Via the group ID, 10 different call chains can be determined. Phonebook entries with the identic
ID are handled as call chain. If an entry of this group is called by a front-door station and the
call is not accepted, all entries with the same ID are called one by one.
