R
2800 LAURA LANE • MIDDLETON, WI 53562 • (800) 288-9383 • FAX (608) 836-9044 • www.tcsbasys.com
1
CP1030 Series
Variable Output
Regulated Power Supply
Product Manual
Description
The CP1030 is a powerful supply for Basys controls,
transmitters and interface devices. The CP1030 takes a
24 VAC input and provides a regulated and adjustable 2
to 27VDC @ 1 amp output.
CP1030
Mounting
The CP1030 is available in a snap track mounting
style. Remove the circuit board from the snap-track and
mount the snap-track with two #10 sheet metal screws
using the center screw access hole provided. Replace
the circuit board when finished.
Wiring
WARNING!!!
TCS Basys Controls products must be powered from a
separate transformer. All TCS Basys Controls devices
are "halfwave" rectified whereby the power ground is
common with the signal ground.
Power: Connect the AC voltage to the terminal blocks
labeled "INPUT" n the circuit board. The AC input
should not exceed 28 VAC. Terminal "1" is the positive
(+) lead and terminal "3" is the negative (-) lead.
Output: Connect the DC voltage output to terminals
labeled "+" and "-". Observe the correct polarity when
wiring transmitters or other devices to the CP1030
output.
Note: Disconnect power to the AC transformer before
wiring the CP1030, and when wiring transmitters or
other devices.
Caution: Wiring should not be run in the same conduit
as line voltage wiring or other conductors that supply
highly inductive loads such as generators, motors,
contractors etc.
L.E
.D
.
INPUT
+2 TO +27vdc OUTPUT
GROUND
A
D
JU
S
T
H
AL
F
W
AV
E
FU
LL
W
AV
E
OUTPUT
1 3
1Amp
Fuse
24VAC Transformer
11
0/
22
0
VA
C
11
0/
22
0
VA
C
