17
Standby mode
Always switch the machine to standby mode after use by pressing the On/Off
button. The machine will then consume very little energy. If no button is pressed
for about ten minutes, the machine will automatically switch to standby mode.
This is both a safety function and a way to save energy. You have the choice
between four lengths of time after which the machine should switch off auto-
matically: 10 minutes, 20 minutes, 30 minutes or 120 minutes. The different
switch-off times can be set as follows:
1. When switching the machine on
or off, press and hold the On/Off
button for approx. 5 seconds.
You will hear a beeping sound.
One button will light up continuously and the other three buttons will flash.
The button lit up continuously shows the switch-off time that has been set:
If the espresso button lights up
up continuously, the machine
will switch off after 10 minutes.
If the caffè crema button lights
up up continuously, the machine
will switch off after 20 minutes.
If the “2x” button lights up
continuously, the machine will
switch off after 30 minutes.
If the “Intense
+
” button lights
up continuously, the machine
will switch off after 120 minutes.
2. Press the button with your
preferred switch-off time.
You will hear 2 beeps .
Customising the automatic rinse
The default setting of the machine is for the automatic rinse to only start when
the machine is cold. If the machine was used shortly before it is switched on, and
is thus still warm, the rinsing process will not restart. A new rinsing process will
only start once the machine has cooled down sufficiently.
You can customise the rinsing process so that it starts every time you switch
on the machine:
1. Press the On/Off button to switch
on the machine.
2. Wait for the machine to warm
up and for all buttons to light
up continuously.
3. Press and hold the On/Off button
and the hot water button for
approx. 5 seconds until you hear
2 beeps.
4. Release the buttons.
The automatic rinse will now start every time you switch on the machine.
Proceed in the same way to revert to the original, temperature-sensitive
settings.
m