11.3.4.4
RTSP Transmitter
Video > Encoder # > Advanced > RTSP Transmitter
Item
Description
DSCP field
Range: [0...63]. DSCP (Differentiated Services Code Point) uses
the first 6 bits of the ToS (Type of Service) field in the header of IP
packets for packet classification purposes. The bit pattern in the
field indicates the type of service and forwarding behavior at the
next node. With 26 bits, up to 64 network service types can be
defined. RFC 2724 (see - http://www.ietf.org/rfc/rfc2474.txt)
describes the Differentiated Services (DS) field and the DiffServ
Code Point. See also the note on Differentiated Services later in
this chapter.
Enable multicast
Activates the Default multicast IP address text box. The RTSP
transmitter itself does not require enabling.
Default multicast IP
address
Select Enable multicast (see above) to activate this check box.
The "Invalid multicast address" warning disappears upon
specification of a valid multicast address.
Default multicast port
Port number for multicast sessions.
11.3.4.5
SAP Settings
Video > Encoder # > Advanced > SAP Settings
SAP announcer
The BC840-MC includes a SAP announcer. The Session Announcement Protocol is used to
advertise that a media stream generated by the BC840-MC is available at a specific multicast
address and port.
Video
54