The Setup menu
66
Metronome page
The Metronome page controls the settings for the Loop Met-
ronome feature.
Routing parameter
Use the Routing parameter to define where the sound of the
built-in metronome click should be heard.
All setting
If you want to hear the Metronome on the main outputs and
the headphone outputs, set the Routing parameter to All.
Headphone setting
If you want to hear the Metronome on the headphone outputs
only, set the Routing parameter to Headphone. This allows you
to build loops synced to a predefined tempo (which you can
hear over headphones) without the metronome disturbing the
audience.
MIDI Tempo parameter
The MIDI Tempo parameter allows you to synchronize the
Loop Metronome and the queued loop features of the Voice-
Live Touch 2 to an external MIDI Clock signal.
Off setting
When you set the MIDI Tempo parameter to Off, the Metro-
nome is synced to Tap Tempo.
Slave setting
When you set the MIDI Tempo parameter to Slave, the Met-
ronome is synced to incoming beats from an external MIDI
Clock signal.
When the MIDI Tempo parameter is set to Slave, tapping the
Tap button will show a popup message: nnn BPM (MIDI Sync).
Sound parameter
The Sound parameter allows you to choose from three differ-
ent metronome sounds: Sine, Kick Drum and HiHat.
Level parameter
The Level parameter sets the volume of the metronome.
Содержание VoiceLive Touch 2
Страница 98: ...Getting Support 92 Getting Support ...