The Setup menu
56
Please note that this is not a mix level control. If you are hear-
ing distortion, or if you see the red clip LED light on your loud
strums, reduce the default gain of 10 dB to a smaller value until
the distortion/clip indication stops.
If your guitar seems too quiet in relation to your vocal and ef-
fects and the Guitar parameter in the Mix menu is already set
to full, increase this value.
Mic Control parameter
The Mic Control parameter sets the target feature you want to
control using the Mic Control button.
To use this feature, you will need to connect a Mic Control-
compatible microphone to the VoiceLive Touch 2 and set the
Input parameter to the correct setting.
N/A
This is shown when the Input parameter is set to a microphone
or input type not supporting Mic Control. In this case, no target
may be set.
Hit setting
When Mic Control is set to Hit, tapping the Mic Control but-
ton has the same effect as tapping the Hit button with no hold
function.
Hit + Talk setting
When Mic Control is set to Hit + Talk,
tapping
the Mic Control
button has the same effect as tapping the Hit button.
Holding
the Mic Control button activates the Talk function. Tap to exit
Talk.
Hit + Tap setting
When Mic Control is set to Hit + Tap,
tapping
the Mic Control
button has the same effect as tapping the Hit button.
Holding
the Mic Control button activates a temporary mode where you
can tap the tempo used by Delay, Rhythm and Metronome fea-
tures. The mode will exit automatically after your last tempo tap.
Hit Moment setting
When Mic Control is set to Hit Moment,
tapping
the Mic
Control button momentarily activates the Hit feature with no
hold function.
Favorite setting
When Mic Control is set to Favorite,
tapping
the Mic Control
button scrolls forward through the 9 Favorite presets.
Holding
the Mic Control button will enter reverse scroll mode. Hold the
Mic Control button
again
to scroll forward.
Содержание VoiceLive Touch 2
Страница 98: ...Getting Support 92 Getting Support ...