The Setup menu
55
E835fx Mic setting
If you are using a Sennheiser E835fx microphone, set the Input
parameter to E835fx Mic. This applies phantom power to the
microphone and lets you use the Mic Control feature.
USB setting
If you want to add effects to an audio signal from a computer
connected to your TC-Helicon device, set the Input parameter
to USB. This disables the hardware microphone and guitar
inputs. The left audio channel from the USB in is routed to the
voice effects, and the right audio channel from the USB in is
routed to the guitar path for guiding harmony and guitar effects.
Roomsense setting
If you want to use the two onboard microphones of the device
as inputs, set the Input parameter to Roomsense. Please not
that with this setup, external sounds will also be detected, so a
quiet environment is essential.
Headphone Mic setting
If you are using cellular-phone style headphones with an in-
tegrated mic, set the Input parameter to “Headphone”. The
Roomsense setting below it will change to “Headphone Mic”,
allowing adjustment of the mic level.
Roomsense parameter
This feature allows you to route the audio signals from the
two onboard microphones to various destinations. Note that
Roomsense audio signals are
never
routed to the main outputs
to prevent feedback.
Ambient setting
The Ambient setting sends sounds from around VoiceLive
Touch 2 to the headphone output only. This allows singers using
headphones for monitoring to hear music and audience sounds.
Ambient/Auto setting
The Ambient/Auto setting sends sounds from around VoiceLive
Touch 2 to the headphones and to the NaturalPlay feature in
order to derive musical information that drives the Harmony
and Hardtune effects.
“n/a” (Input set to Roomsense)
When you have set the Input parameter to Roomsense, the
Roomsense parameter will show “n/a” (not available).
Guitar parameter
The Guitar parameter calibrates the Guitar input sensitivity to
the level of your guitar.
Содержание VoiceLive Touch 2
Страница 98: ...Getting Support 92 Getting Support ...