TC Communications TC1920, Руководство пользователя

Страница: 51 / 89

Chapter 4 Management through the Web Screens
TC1920 Rev 1.3 User Manual 4-26
4.3.6.3 Telephone/Analog > Address Book
This page provides the telephone/analog internal address book
configurations for the unit.
Entries
The address book is used instead of the SIP Server phone number
assignment and allows each of the individual TC1920 Telephone/Analog
units to communicate with each other over the Ethernet network. For each
unit that is installed in the network, annotate the IP address of the unit and
compare this IP Address with the phone numbers definitions assigned to the
FXS ports.
Registrar Server
Use Proxy Server
Address Check to use the Proxy Server address for the
Registrar Server address.
If the Registrar server address and Proxy server
address are different then the REGISTER message will
not pass through Proxy, but if Outbound Proxy is
configured then the REGISTER message must pass
through Outbound Proxy.
Registrar Server
Address Configure the address of the Registrar server address
as an IP address or hostname.
UDP Port Configure the UDP port number of the Registrar Server
listening port. Default is 5060.
Registrar Expiry Configure the expiry time in seconds for the registration
with SIP Server. The TC1920 will resend REGISTER
message to the Registrar Server based on the time
configured.
NOTE The SIP Options must be set to “Address Book” in the
Telephone/Analog general port settings page (see
Port Settings,
on page 4-22
).