Multi module bay adon
As requested by the community we now include the option for a mini-module bay add-on. To use this
module bay you need your tango 2 to be on hardware revision 2 or later (
).
You can get the stick-on module bay including the required parts at the
. Follow the steps in the
picture below. This is an easy task and can be done within 10 minutes easily.
Important note:
The FrSky XJT mini module does NOT work with the Tango 2! The Multi-Protocol-Modules that are available
work fine (status 10/2020). The JR-bay version does work without any issues.
In the next few weeks you can get MPM from TBS which will give you the highest available output power.
48
