TBi Industries PP-TX, Руководство по эксплуатации

Страница: 36 / 63

Operating instructions TBi PP-TX welding torch TBi Industries GmbH
Page 36 / 63 Subject to change without notice.

2020 TBi Industries GmbH
1.2 Symbols and signal words
Symbol Signal word Meaning
Danger! Description of a hazard with a high degree of risk, which can lead to
death or serious injuries if it is not avoided.
Warning! Description of a hazard with a medium degree of risk, which can
lead to death or serious injuries if it is not avoided.
Caution! Description of a hazard with a low degree of risk, which can lead to
minor or moderate injuries if it is not avoided
Note:,
Important note! Indication of a note that contributes to intended use, or to
information on the product.
1.3 Conditions of intended use
1.3.1 Application, Transport and Storage
1. The device should only be used within the above mentioned technical specifications and for its intended
purpose. It must only be used with Original TBi torch necks, accessories, spare parts and wear parts.

Do not hammer with the torch, do not use it as a bending tool

Do not pull on the cable assembly

Do not kink cable assembly or control cable

Do not roll up the cable assembly to a radius smaller than 0.25 m

Please follow the instructions for regular cleaning in Section 5
2. The product is intended for industrial and commercial use and must only be utilized by trained
personnel. The manufacturer is not liable for any damage or accidents resulting from improper usage.
3. All installation instructions, operating instructions and maintenance instructions listed in this manual
must be observed.
4. The product must be kept dry and protected from humidity and corrosive agents when transported,
stored or used.
The welding torch is made for use within an ambient temperature between –10° and 40°C / 14° to 104°F.
Outside this range, special measures may be necessary. In freezing conditions, please use an adequate cooling
liquid.
1.3.2 Scope of delivery

Operating instructions

TBi PP-TX Push-Pull welding torch
1.3.3 Disposal and recycling

Please do not dispose of the TBi PP-TX Push-Pull welding torch in the household
waste.

Please dispose of the TBi PP-TX Push-Pull welding torch according to country-
specific regulations.