Model LR-2066 & LR-2866A Hoist Installation and Operation Manual
Stock No. 03 5839
Page 13 of 21
3.
Determine the "X" value referring to Figure 8. The "X" value is the horizontal distance
between the body center of gravity and the rear hinge when the body is empty and down. Be sure to
include any items attached to the body such as toolboxes or other structures when determining the
center of gravity.
FIGURE 7
FIGURE 8
4.
On the left side of Chart 1, pick the "P" value for your application. On the top of the same
chart, pick the "X" value for your application. Below the "X" value and to the right of the "P" value is
listed an amount of weight. This represents the maximum weight that the body can weigh and be
supported by only one body prop. If the body weights more than the amount listed, 2 body props will
be required. Contact TBEI-Rugby to order another body prop.
NOTE:
If the body weighs more than 2 times the amount listed, another type of body prop
with more weight capacity will be required, as 2 body props will not support this
empty body.
