TBB power Energier Apollo Series, Руководство пользователя, Страница: 48 / 62

Energier Apollo User Manual
TBB Power Co.
，
Ltd
42
++ Battery charged – floating

After coming into floating, the Solar LED on front panel and remote will slow flash.

On remote panel, all Battery LED (25%-50%-75%-100%) will illuminate.
7.9 Power Saving mode

You can set Energier Apollo working in power save mode by dip switch 7, in which the status
consumption power can be dramatically reduced.

Upon Energier Apollo being set in this mode, Power Save mode LED on front panel will
illuminate.

On remote, upon Energier Apollo enter into power saving, the Inverter LED on remote will flash.
After resume normal output, it will illuminate.
7.10 Performing De-sulphation Charging
It is strongly recommended to read this section carefully before you set the de-
sulphation charging and DO NOT leave battery unattended while performing de-
sulphation.
Always check if your battery supplier recommended de-sulphation charging. Only
start when it is suitable.