TAYO Zontes ZT125-M 2022, Руководство по обслуживанию

Страница: 179 / 188

179 / 188
and buffer glue, and remove the rocker spring. Remove the
right windshield and rocker spring in the same way.
f. Use a 4# hexagon socket to remove 2 M6×16 bolts and
remove the spring washer. Separate the windshield motor
pressure plate, windshield motor assembly and windshield
base assembly.
g. Use a Phillips screwdriver to remove 2 M4×16 bolts to
separate the rocker arm pressure block from the lower right
rocker arm. Remove the 2 pieces of rocker arm bumper glue
from the rocker arm clamp. Remove the left lower rocker
arm in the same way. If you buy a windshield motor, you
need to buy a "1240300-007000 HJ125-6 Battery rubber
gasket”, pasted on the side of the windshield motor pressure
plate.
h. Remove the M8×16 bolts with 6# inner hexagon, and
remove the gasket, bearing and upper rocker arm.
Removal of the left and right decorative
covers of the front storage box
a. Use 4# inner hexagon to remove one M6×14 bolt
connecting the left decorative cover of the front storage box
panel and the surrounding middle part; use 5# inner hexagon
to remove 1 non-standard M6×14 bolt on the left decoration
cover of front storage box panel; use 4# inner hexagon to
remove 1 swell nail on the left decoration cover of the front
storage box panel.
b. Pry out the front left pedal rubber pad and the front left
pedal aluminum pad from the position pointed by the small
arrow using a single-character batch, and then pull out the
front left pedal rubber pad and the front left pedal aluminum
pad upwards in the direction of the big arrow.
Caution:
When using the one-word pry, you can use non-woven cloth
and other tools to wrap the one-word batch to prevent
scratching the paint surface.
c. Use 4# inner hexagon to remove the two M6×12 bolts ⑷
connecting the left decorative cover of the front storage box
panel on the front storage box panel.
d. Use one hand to grasp the left decorative cover mark
(green rectangle) of the front storage box panel and pull out,
and use one hand to hold the mark (green rectangle) of the
front storage box panel and press down Until the top of the
left decorative cover of the front storage box panel and the
front storage box panel are connected (yellow area), the 3
buckles are separated,and then the left decorative cover of
the front storage box panel is surrounded by the front