TAYO ZONTES 310T-M 2022, Руководство по обслуживанию

Страница: 38 / 188

38 / 188
8. Reinstall
a. Refer to the steps of removing the filter housing to
install the housing back.
b. Replace the air inlet baffle and the air inlet cover of the
replaced air inlet filter element.
c. If the original scooter has a shock-proof sponge, it needs
to be placed well, if not, go to the next step.
d. Clip M6×14 bolts to the inner step hole of the engine left
cover, and then use a 4# inner hexagon to penetrate from
the outside and hold the bolt
.
e. Align the left bolt with the mounting hole and tighten it.
f. Before installing other bolts, install the exposed sponge
and plug it back into the left cover.
g. Use 4# inner hexagon to install the other 4 M6×14 bolts.
Replace the decorative buckle.
●The vehicle must be parked on a flat and stable ground or a
lifting platform.
●The operation can only be performed after the engine has
cooled down completely.
●The air filter element and the engine air inlet element
should be replaced every 10000km (621 mile).
●The air filter element and the engine air inlet element
should be cleaned regularly in accordance with the provisions
of the regular maintenance and lubrication table.
●If you often ride in humid or dusty areas, you should check
the air filter element more frequently. Be sure to inspect the
waste oil pipe of the air filter frequently.
●If the filter element is damaged, it must be replaced, and
otherwise the dirt will be directed into the engine and cause
damage to the engine.
●Ensure that the filter element is assembled in place.