Taylor SLIM7, Руководство оператора

Страница: 34 / 62

6-2
OPERATING PROCEDURES
Model 736
Operating Procedures
6
Figure 6-4
Freezer Door Assembly
1. Place the door O-ring into the groove on the back of
the freezer door.
Figure 6-5
2. Slide the two O-rings into the grooves on the draw
valve and lubricate them.
Figure 6-6
3. Lightly lubricate the inside of the top of the freezer
door valve cavity.
Figure 6-7
Note: If the draw valve is inserted with the flat

surface facing the user, this will prevent the machine
from operating.
4. Insert the draw valve from the top, with the flat part
facing toward the machine.
Figure 6-8