manualshive.com logo in svg

Taylor McDonald's R200, Руководство по эксплуатации оборудования, Страница: 15 / 56

Поделиться
Скачать
Taylor McDonald's R200 Скачать руководство пользователя страница 15

13

USER FUNCTION MENU STRUCTURE

•

Press the Menu button to find the desired menu, then press the OK button to select the menu.

•

Use the Up 

 and Down 

 arrow buttons to find the desired function.

•

Press the OK button to select the desired function.

•

Menu button exits function at any time and returns to Main Menu.

Note:  

A Service Password is available. Use the Service Password if the manager’s password has been misplaced. 

The Service Password operates in the Service Menu only and will erase the manager’s password and restore to default 

(no password). The Service Password sequence is:

Small Basket, Up arrow, Down arrow, Large Basket, Medium Basket (twice), then OK button.

Function Name

Description

Last Basket/Cancel
Selections

Halts weighing-in process.
Turns off all basket load size button lights.
Immediate return to main screen.

Last Basket/Cancel Selections

Halts weighing-in process. Turns off all size button lights.
Immediate return to Main screen.

Calibrate 

Note:

See "Calibrations and 

Adjustments" on page 1-28.

Calibrates scale.

1. Remove hopper. 

Note:

 

Leave the housing in place on the accumulator doors.

2. Display reads “Place Basket.” Waits for a basket to be placed, then empties the 

accumulator doors into the basket.

3. Tares automatically.
4. Display reads “Place 1.0 lb.”, or “Place 450 g” if set to metric units. Place 1.0 lb. (450 g) 

weight on the accumulator doors.

5. Display reads “Place 2.0 lb.,” or ”Place 900 g” if set to metric units. Place an additional 

1.0 lb (450 g).

6. Display reads “Remove Weight.” Remove weights from the accumulator.
7. Re-install hopper. The dispenser will return to normal operation with no basket size 

selected.

Error History

Displays the last 10 recorded errors in reverse order starting with the last error recorded.

•

Up button shows next error.

•

Down button shows previous error.

•

OK button closes function.

Software Version

Display shows current software for both controller software and display software. OK button 
closes function.

Main Screen

Immediate return to Main screen.

Содержание McDonald's R200

























































Отзывы:

Нет отзывов