Taylor C302, Руководство оператора

Страница: 32 / 52

6-6
OPERATING PROCEDURES
Model C302
Operating Procedures
6
2. Prepare 2 gal (7.6 L) of an approved 100 PPM
sanitizing solution (examples: Kay-5
®
or Stera-
Sheen
®
). Use warm water and follow the
manufacturer's specifications.
Important! Make sure the sanitizer is completely
dissolved.
3. Using an empty bag of syrup, cut the syrup line
connector from the end of the bag.
Figure 6-22
4. Connect the syrup line to the syrup line connector
that was cut from the syrup bag.
Figure 6-23
5. With the bag connector attached to the syrup line,
place the syrup line into the pail of sanitizing solution.
Figure 6-24
6. To place the left freezing cylinder in the Sanitize
mode, press the MENU (SELECT) key. Move the
cursor by pressing the AUTO (- ->) key until the third
line indicates RINSE / SANITIZE.
7. Press the MENU (SELECT) key. Move the cursor
under the word SANITIZE by pressing the OFF (<- -)
key.
8. Pressing the MENU (SELECT) key will give you the
option for sanitizing the left freezing cylinder. Move
the cursor under the word YES. Pressing the MENU
(SELECT) key at this time will start the flow of
sanitizing solution into the left freezing cylinder.
17011
17041
17013
OPERATOR MENU
A B C D E F G H I
RINSE / SANITIZE
L E S > - - - - <
RINSE / SANITIZE
RINSE SANITIZE EXIT
- - - - -
L E S > - - - - <
SANITIZE
LEFT SIDE YES NO
- - -
L E S > - - - - <