background image

11-2  

LIMITED WARRANTY ON PARTS

Models 441 & 444

Limited Warranty on Parts 

11 

LIMITED WARRANTY EXCEPTIONS

This limited warranty does 

not 

cover:

1. Labor or other costs incurred for diagnosing, repairing, removing, installing, shipping, servicing or handling of 

defective Parts, replacement Parts, or new Parts.

2. Normal maintenance, cleaning and lubrication as outlined in the Taylor Operator’s Manual, including cleaning of 

condensers or carbon and grease buildup.

3. Required service, whether cleaning or general repairs, to return the cooking surface assemblies, including the 

upper platen and lower plate, to an operational condition to achieve proper cooking or allow proper assembly of 
release sheets and clips as a result of grease build-up on the cooking surfaces, including but not limited to the 
platen and plate, sides of the shroud or top of the shroud.

4. Replacement of cooking surfaces, including the upper platen and lower plate, due to pitting or corrosion (or in the 

case of the upper platen, due to loss of plating) as a result of damage due to the impact of spatulas or other small 
wares used during the cooking process or as a result of the use of cleaners, cleaning materials or cleaning 
processes not approved for use by Taylor.

5. Replacement of wear items designated as Class 000 Parts in the Taylor Operator’s Manual, as well as any release 

sheets and clips for the Product’s upper platen assembly.

6. External hoses, electrical power supplies, and machine grounding. 

7. Parts not supplied or designated by Taylor, or damages resulting from their use.

8. Return trips or waiting time required because a service technician is prevented from beginning warranty service 

work promptly upon arrival.

9. Failure, damage or repairs due to faulty installation, misapplication, abuse, no or improper servicing, unauthorized 

alteration or improper operation or use as indicated in the Taylor Operator’s Manual, including but not limited to the 
failure to use proper assembly and cleaning techniques, tools, or approved cleaning supplies.

10. Failure, damage or repairs due to theft, vandalism, wind, rain, flood, high water, water, lightning, earthquake or any 

other natural disaster, fire, corrosive environments, insect or rodent infestation, or other casualty, accident or 
condition beyond the reasonable control of Taylor; operation above or below the gas, electrical or water supply 
specification of the unit in which a part is installed; or Parts or the units in which they are installed repaired or 
altered in any way so as, in the judgment of Taylor, to adversely affect performance, or normal wear or 
deterioration.

11. Any Part purchased over the Internet.

12. Failure to start due to voltage conditions, blown fuses, open circuit breakers, or damages due to the inadequacy or 

interruption of electrical service.

13. Electricity, gas or other fuel costs, or increases in electricity or fuel costs from any reason whatsoever. 

14. Damages resulting from the use of any refrigerant other than that specified for the unit in which the Part is installed 

will void this limited warranty.

15. Any cost to replace, refill or dispose of refrigerant, including the cost of refrigerant.

16.

ANY SPECIAL, INDIRECT OR CONSEQUENTIAL PROPERTY OR COMMERCIAL DAMAGE OF ANY NATURE 
WHATSOEVER. 

Some jurisdictions do not allow the exclusion of incidental or consequential damages, so this 

limitation may not apply to you.

This limited warranty gives you specific legal rights, and you may also have other rights which vary from jurisdiction to 
jurisdiction.

Содержание 444







































Отзывы: