Taylor-Dunn G0-010-00, Инструкция по обслуживанию и замене запасных частей

Страница: 8 / 362

1.2
9929758 R01 - 2019 TAYLOR-DUNN G-100 Service Manual
© Copyright TAYLOR-DUNN
VEHICLE INFORMATION
MODEL NUMBER DESIGNATION
Example: R17RMA50A1
GROUP MODEL YEAR MAKE / CHASSIS CODE ENGINE CODE REGION OPTION
1st 2nd 3rd 4th* 5th* 6th* 7th* 8th* 9th 10th**
R 1 7 R M A 5 0 A 1
* = digits that would transfer to 17 digit VIN and are used in digits 4-8 respectively
** = 10th digit will be used on color/featured versions of models (not including the base)
First 3 digits and 10th digit are used in model number only. They are not used with the 17 digit VIN.
Digits 1 through 8 determine Digital Wrench calibration.
VEHICLE IDENTIFICATION NUMBER (VIN)
DESIGNATION
Example: 4XARUE573FG000000
WORLD MFG. ID
VEHICLE DESCRIPTORS VEHICLE IDENTIFIERS
CHASSIS
DRIVELINE
CHASSIS
MODIFIER
ENGINE
SIZE
ENGINE
MODIFIER
CHECK
DIGIT
MODEL
YEAR
*
MFG.
LOCA
TION
INDIVIDUAL SERIAL NO.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
4 X A R U E 5 7 3 F G 0 0 0 0 0 0
* Model Year: A = 2010; B = 2011; C = 2012; D = 2013; E = 2014; F = 2015; G= 2016; H=2017
VIN / ENGINE NUMBER LOCATION
Whenever corresponding about a TAYLOR-DUNN utility vehicle, be sure to refer to the Vehicle Identification Number
(VIN) and the engine model and serial number.
The VIN
q
can be found stamped on the upper frame rail on the rear LH side of the vehicle below the cargo box.
The engine model and serial number
w
can be found on a decal applied to the engine’s magneto cover.
GENERAL INFORMATION