Taylor-Dunn G0-010-00, Инструкция по обслуживанию и замене запасных частей, Страница: 74 / 362

3.14
9929758 R01 - 2019 TAYLOR-DUNN G-100 Service Manual
© Copyright TAYLOR-DUNN
1. Fill fuel tank with unleaded fuel which has a minimum
pump octane number of 87 = (R+ M)/2.
2. Refer to Chapter 2. Check oil level indicated on the
dipstick. Add oil if necessary.
3. Drive slowly at first to gradually bring engine up to
operating temperature.
4. Vary throttle positions. Do not operate at sustained
idle or sustained high speed.
5. Perform regular checks on fluid levels, controls and
all important bolt torques.
6. Change oil and oil filter after break-in period at 25
hours.
ENGINE MOUNTING AND TORQUE VALUES
REF. DESCRIPTION NOTES
q Bolt Torque to 55 ft-lbs (75 Nm)
w Bolt Torque to 40 ft-lbs (54 Nm)
e Nut Torque to 25 ft-lbs (34 Nm)
r Bolt Torque to 18 ft-lbs (25 Nm)
ENGINE / COOLING SYSTEM