Taylex ABS4200, Руководство по установке

Страница: 7 / 13

Page 7 of 13
PLEASE NOTE

Tanks should not be lifted over houses, sheds or other property of value,
nor should they be lifted under low power lines

Tank sites that are cut out of sloping hills will require enough flat area for
the truck to be unloaded

Unloading on awkward and dangerous sites will be at the driver's
discretion. Safe and clear access is the responsibility of the
property owner/builder.
7. INSTALLATION
Always ensure the installation location including the future landscaping provision
allows for the diversion of storm-water and surface waters away from the system.
Width Height
Inlet Height
(from bottom of
tank)
Inlet
Depth
(from ground
level)
Required
Base
(5-7mm Drainage
Gravel/ Sand)
Hole
Width
Hole
Depth
TANK 1* 2425 2700 2070 530 100
3000 2700
TANK 2* 2425 2700 1950 650 100
3000 2700
*
Refer to Excavation & Lifting Instructions on Pages 9 & 10
STANDARD Taylex ABS 42 00
NON TRAFFICABLE LOADS ONLY NON TRAFFICABLE LOADS ONLY
2425 mm 2425 mm
100mm of 5mm-7mm drainage gravel or sand 100mm of 5mm-7mm drainage gravel or sand
100mm
Inlet
Lifting
Holes
Lifting
Holes
100mm
Outlet
100mm
Inlet
Lifting
Holes
Lifting
Holes
Top of tank to be a minimum
of 100mm above landscaped ground level