TAVRIDA ELECTRIC Rec15/25 Al1 5p, Руководство пользователя, Страница: 91 / 136

91
Figure 91
PSFM fixing provisions
7.3.3.2 Installation
1) Install the new PSFM on the fixing studs inside the RC5_4;
2) Tighten four nuts with washers fixing the PSFM;
3) Connect plug “14” to RCM;
4) Connect one earthing wire from the control cubicle to the stud on the PSFM marked with the grounding
sign. Earthing wire from the PSFM connection to the stud on the control cubicle located above the PSFM;
5) In case you have a PSFM without a plug, use the old one. Numbers on the wires correspond to numbers
on plug “14”;
6) Connect the auxiliary supply wiring to the inputs of the PSFM.
Battery Replacement 7.3.4
7.3.4.1 Dismounting
1) Switch off the battery circuit breaker;
2) Disconnect the plug “13” from the RCM;
3) Disconnect the wires from the battery terminals - the minus terminal should be disconnected first;
4) Unscrew four bolts from the battery fixing plate (Figure 92);
5) Remove the Battery.
Figure 92
Battery fixing provisions