TAVRIDA ELECTRIC Rec15/25 Al1 5p, Руководство пользователя, Страница: 74 / 136

74
Figure 75
Uploading protection settings via TELARM
Communication Settings Modifications 6.6.2
In general, to modify settings it is recommended to follow the following procedure:
1) Download latest settings from the device;
2) Modify downloaded settings (alternatively, settings can be created from scratch);
3) Upload modified settings back into protection device.
The same settings can be uploaded to multiple devices, however, every Rec15/25 needs to have a unique
serial number, slave number for SCADA, etc.
6.6.2.1 Communication Settings Downloading
To download communication settings from the device, make sure that TELARM connection is established.
To download communication settings:
1) Select the device on the TELARM;
2
) Select “Main Menu -> On-Line -> Download settings from device…” (Figure 76).
3) The successful downloading reading will appear in Connection log in case connection was established via
PCI or in Massages log in case connection was established via TDI.
4) To open “Recloser settings” window, click the button next to the line “Communication settings
downloaded” in “Messages log” (or “Communication settings downloaded” in Connection log).
NOTE! Communication settings downloaded from the device are highlighted in pale grey and cannot be
changed directly in the “Recloser settings” window. To change the settings refer to clause 6.6.2.2 of this
guide.