TAVRIDA ELECTRIC Rec15/25 Al1 5p, Руководство пользователя, Страница: 73 / 136

73
Figure 74
Changing protection settings via TELARM
6.6.1.3 Protection Settings Uploading
To upload protection settings to the device, make sure that you are connected to it.
To upload protection settings to the controller using TELARM interface it is required to mark settings as
“Approved”.
To approve settings:
1) Right click on the submenu “Protection settings” in Database browser and choose “Mark as Ready”
(Figure 75);
2) Right click on the same submenu and choose “Mark as Approved”;
3) The green “V” sign will appear near the submenu after successful approval.
Approved protection settings can be uploaded to the device:
4) In “On-Line” menu click “Upload settings to the device…” (Figure 75);
5) The reading “Protection settings uploaded” will appear in the Connection log after successful uploading if
settings were uploaded via PCI. “Protection settings uploaded” will appear in Messages log if settings were
uploaded via TDI;
6) It is possible to check correctness of the uploaded settings by pushing the button near the reading in
Connection log if protection settings were uploaded via PCI or in Messages log if protection settings were
uploaded via TDI.