TAVRIDA ELECTRIC Rec15/25 Al1 5p, Руководство пользователя, Страница: 31 / 136

31
3.2 Storage
The packaged Rec15/25 should be stored in dry storage areas with natural ventilation.
WARNING! It is not permitted to stack more than two packages during storage.
Unpacked and assembled equipment can be stored before installation. Keep it in a clean, dry location with
sufficient air circulation and temperature to prevent condensation. Insulation must be protected against dirt
and moisture.
3.3 Inspection
Each Rec15/25 is completely assembled, tested, and inspected at the factory. It is in good condition when
accepted by the carrier for shipment. Upon receipt, inspect the package for signs of damage. After
unpacking the Rec15/25, inspect its components thoroughly for damage incurred during shipment. If damage
is discovered, file a claim with the carrier immediately.
The inspection process is described in the table below:
Table 17
– Inspection list
# Object Inspection description
1 Plastic details Absence of mechanical damages, scratches, spots
2 Silicon insulation Absence of mechanical damages
3 Metal parts Absence of mechanical damages, rust and spots
3.4 Unpacking
Follow the recommendation below to unpack:
Pole Mounted Recloser 3.4.1
1. Cut strapping tapes 2. Unscrew eight screws from upper collar and take it off