TAVRIDA ELECTRIC Rec15/25 Al1 5p, Руководство пользователя, Страница: 18 / 136

18
Figure 18
Digital outputs
Technical parameters of Input/Output Module are in Table 8.
1.2.2.6 Ethernet (ETH)
Ethernet interface module can be supplied as an accessory.
Wired Ethernet module
Ethernet module provides full remote (SCADA) and local communication and engineering functionality via
RJ45 port.
Figure 19
Ethernet module installed on RCM
Technical parameters for Ethernet interface in Table 9.
Wired ethernet module starts working automatically after Network settings setup for corresponding interface
is completed. LED indication description:

Green LED
– Indicating the network connection speed.
Glowing continuously
– Aprox 100 Mbs;
No indication
– Less than 10 Mbs;
Default setting is 100 Mbs;

Yellow LED
– Packages transmitting is active.

No LED indication
– Ethernet module disconnected.
Ethernet module operation is continuously monitored by the controller. Automatic restart for Ethernet module
will be initiated in case device hanging will be detected.
Optical Ethernet module
Optical Ethernet module provides full remote (SCADA) and local communication and engineering
functionality via optical fiber SC/ST interface.