TAVRIDA ELECTRIC Rec15/25 Al1 5p, Руководство пользователя, Страница: 92 / 136

92
7.3.4.2 Installation
1) Switch off the battery circuit breaker;
2) Switch off auxiliary AC power supply circuit breaker;
3) Disconnect
plug “13” from the RCM;
4) Mount the battery to the appropriate place;
5) Install battery fixing plate and fix it with four bolts (Figure 92);
6) Install plus terminal to the battery;
7) Install battery temperature sensor and minus terminal to the battery;
8
) Connect plug “13” to the appropriate RCM socket;
9) Switch on auxiliary AC power supply circuit breaker;
10) Switch on the battery circuit breaker.
RC5_4 Replacement 7.3.5
RC5_4 dismounting and installation should be performed according to the Installation section of this
document.
NOTE! To upload protection and communication settings to a newly installed RC, refer to chapter 6.6.1.3
and 6.6.2.3 correspondingly.
OSM Replacement 7.3.6
OSM dismounting and installation should be performed according to the Installation section of this document.
NOTE! Each OSM is supplied with current and voltage sensor (CVCS) coefficients, if the OSM has been
replaced, it is recommended to upload the correct CVCS coefficients into the RC. To upload sensor
coefficients refer to chapter 5.1.3 of this guide.