PRIDE
SLE570
REF: PL.TAV.SLE570 | 8.14 V1.00
ELECTRICAL SAFETY INSTRUCTIONS
ELECTRICAL SAFETY INSTRUCTIONS
(Applicable to UK Installa ons only)
All
fi
ngs must be installed by a competent person, in accordance with current IEE wiring
regula ons. If in doubt consult a quali
fi
ed electrician
IMPORTANT
Always switch o
ff
the electrical supply at the mains during installa on and maintenance. It
is recommended that the fuse is withdrawn or the circuit breaker is switched o
ff
for the
necessary circuit before installa on commences.
Fi ng in Bathrooms is subject to the appropriate zone in accordance with IEE Regula ons.
This product is suitable for zone 2 and outside zones. IT IS NOT suitable for installa on in
Zone 0 or Zone 1. It is also not suitable for installa on in saunas, steam rooms or shower
cubicles. This product is only suitable for permanent installa on. DO NOT connect to a
trailing plug and socket outlet. Although this product has an Ingress Protec on ra ng of
IP44 it is only suitable for indoor use. Do not a ach the product to surfaces that are damp
or otherwise electrically conduc ve.
INSTALLATION CARE & SAFETY
INSTALLATION CARE & SAFETY
Wear suitable eye protec on when drilling. Take care when using power tools near water -
the use of a residual current device (RCD) is advised. Beware of hidden cables or pipes.
Take care if drilling on led surfaces in case the drill slips. A piece of masking tape applied
to the wall before marking out the
fi
xing holes will stop the drill from wandering.
DO NOT strike glass components with hard or pointed items. DO NOT place very hot or
very cold items against or in close proximity to glass surfaces unless an adequately thick
insula on material is used to prevent such items coming in contact with the glass.
The nominal thickness of the mirror glass used in this product is 5mm and is
fi
lm backed
for safety. If the glass becomes chipped or broken replace immediately.
This product should be posi oned well away from curtains and other fabrics. Never cover
the mirror. This product is heated, we recommend that it is turned o
ff
a er use and should
never be le on for prolonged periods of me
This product could be dangerous and is only to be installed by a competent person.
CLEANING
CLEANING
It is recommended that the unit is cleaned with a so , dry, non abrasive cloth when turned
o
ff
. Never use cleaning agents or abrasive materials on any type of surface
fi
nish. Do not
allow moisture to come into contact with the electrical components.
COMPLIANCE
COMPLIANCE
This product complies with all relevant Bri sh and European safety standards:
WIRING
WIRING
This product is manufactured to class I category and must have an earth connec on.
COLOUR CODING:
L - Live
= Brown
N - Neutral = Blue
- Earth
= Green & Yellow
LIGHTS
LIGHTS
.
To obtain a replacement LED lamp if faulty or broken contact customer services (see
details at foot of page) qutoing product code ML480.
2
2
2
OUTSIDE
OUTSIDE
ZONES
ZONES
2
ZONE
ZONE
1
0.75m
2.25m
3.0m
0.6m
0.6m
0.75m
Bathroom Zones Diagram
Bathroom Zones Diagram
Distances from a bath tub or shower tray
Please retain for future reference
PRIDE ILLUMINATED MIRROR
Installation & care instructions
Please retain for future reference
Tavistock, Brassmill Lane Trading Estate, Bath, BA1 3JF
T. 01225 787870 | F. 01225 448877 | E. [email protected] | W. www.tavistock-bathrooms.co.uk
