Taurus TF-Z9-PRO, Руководство по сборке и эксплуатации

Страница: 23 / 48

Z9PRO
23
3.3 Turning on and setting up the Indoor Cycle
After turning on the bike or holding the REST button for 2 seconds, a signal will sound for 1 second
and all values will be displayed on the LCD screen (see fig. 1). Afterwards the display shows the
settings for the wheel diameter and the speed measurement unit (see fig. 2) and changes on to the
main menu (see fig. 3).
Fig. 1 Fig. 2 Fig. 3
3.4 Programs
There are a total of 19 programs available to choose from:
+ Quick start programs: 1
+ Target programs: 1
+ Pre-set programs: 12
+ Heart rate programs: 4
+ Watt controlled programs: 1
To chose a desired program, while in the main menu press the UP or DOWN-button to scroll through
Manual

Beginner

Advance

Sporty

Cardio

Watt and confirm your choice with the MODE
button.
3.4.1 Quick Start program
1. To start the quick start program while in the main menu press the START/STOP-button.
Various values will start counting upwards.
2. To pause the program, press the START/STOP button again.
3. To end the program, press the RESET button.
The display will change to the main menu.