Taurus TF-Z9-PRO, Руководство по сборке и эксплуатации

Страница: 33 / 48

Z9PRO
33
5 TROUBLESHOOTING, CARE AND MAINTENANCE
5.1 General Instructions
⚠ WARNING
+ Do not make any improper changes to the equipment.
⚠ CAUTION
+ Damaged or worn components may affect your safety and the life of the equipment.
Therefore, immediately replace damaged or worn components. In such a case, contact the
contract partner. The equipment must not be used until it has been repaired. If necessary,
use only original spare parts.
࣑ ATTENTION
+ In addition to the instructions and recommendations for maintenance and care given here,
additional service and/or repair work may be necessary; this must only be carried out by
authorised service technicians.
5.2 Faults and Fault Diagnosis
The equipment undergoes regular quality controls during production. Nevertheless, faults or
malfunctions may occur. Frequently, individual parts are responsible for these disturbances, an
exchange is usually sufficient. Please refer to the following overview for the most common errors and
how to correct them. If the equipment still does not function properly, contact your contract partner.
Fault Cause Solution
Display won't turn on Missing power connection Check power cord and plug
Squeaking & cracking
noises
Loose or too tight bolt
connection(s)
Check and/or lubricate screw
connection(s)
Cracking around
the pedals
Pedals are loose Re-tighten the pedals
Machine wobbles Machine is not standing even Correctly set the adjustable feet
Handlebars/Saddle
wobbles
Screw is loose Re-tighten the screws
No pulse displayed
+ Interruptive sources in
the room
+ Incompatible chest strap
monitor
+ Incorrect position of the
chest strap monitor
+ Eliminate the source of interference
(e.g. Mobile pphones, WiFi,
Lawnmower- and Vacuum robots,
etc.)
+ Use a compatible chest strap monitor
(see recommended accessories)
+ Re-position the chest strap and/or
moisten the electrode(s)
+ Change the batteries of chest strap
monitor / Possibly defective chest
strap monitor