Taurus TF-RUN-X-2, Руководство по сборке и эксплуатации

Страница: 18 / 36

RUN X
18
3.3 First Steps
As soon as the console is switched on, the display lights up completely (Fig. 1) and a long signal
sounds. The console then enters Standby mode and the symbols for Interval 10/20, Interval 20/10,
DISTANCE Target Program and PULSE (heart rate) are displayed in sequence (fig. 2-5).
L
NOTICE
If the console does not receive any input or signal within 4 minutes, the console will go into
sleep mode.
Fig. 1 Fig. 2 Fig. 3
3.4 Pause programme - Pause mode
1. To pause the programme, press the START/PAUSE button once during the workout.
During the pause mode, the workout data is shown with a “P” on the display (Fig. 6) and a beep sounds for
0.5 seconds every 30 seconds.
L
NOTICE
If the console does not receive any input within 5 minutes while in pause mode,
the console goes into standby mode.
2. To resume, press the START/PAUSE key again.
Fig. 4 Fig. 5
Fig. 6