Taurus GST2200, Инструкция по эксплуатации

Страница: 8 / 64

EN
(Original instructions)
STEAM BRUSH
GST2200
DESCRIPTION
A. Water tank
B. Body
C. Ironing head
D. Steam button
E. Cable storage cover
F. Low water indicator
G. Power button
H. Steam level selection button
I. Steam modes:
1. Synthetic fibre
2. Silk
3. Wool
4. Cotton
5. Linen
J. Accesories
a. Soft brush
b. Fur brush
c. Resin filter (x2)
If the model of your appliance does not have
the accessories described above, they can
also be bought separately from the Technical
Assistance Service.
USE AND CARE:
Fully extend the appliance’s power cable
before each use.
Do not switch the appliance on without water.
Do not use the appliance slanting or turn it
upside down.
Do not turn the appliance upside down while it
is in use or connected to the mains.
Do not strain the working capacity of the
appliance.
Unplug the appliance from the mains before
refilling the water tank.
Unplug the appliance from the mains when not
in use and before cleaning, adjusting, charging
or changing accessories.
Store this appliance out of reach of children
and/or persons with physical, sensory or
reduced mental or lack of experience and
knowledge.
Do not store the appliance when it is still hot.
Use this appliance, its accessories and tools
in accordance with these instructions, taking
into account the working conditions and the
work to be performed. Use the appliance for
operations different from those intended could
result in a hazardous situation.
The use of distilled water is recommended.,
especially if the water in your area contains
clay or if it is “hard” (containing lime or
magnesium).
Never leave the appliance connected and
unattended if is not in use. This saves energy
and prolongs the life of the appliance
Do not use the appliance on any part of the
body of a person or animal.
CAUTION: Water condensation may appear
on the surfaces and objects around this
appliance.
INSTRUCTIONS FOR USE
BEFORE USE:
Make sure that all products’ packaging has
been removed.
Some parts of the appliance have been
lightly greased. Consequently, the first time
the appliance is used a light smoke may be
detected. After a short time, this smoke will
disappear.
Prepare the appliance according to the
function you wish to use.
When using the garment steamer for the first
time, let it release steam for a few minutes.
This helps to remove impurities and odours,
which may remain due to the manufacturing
process.
When using the garment steamer for the first
time, you may want to test it on an old piece of
fabric before using it on your clothes.
NOTE: this steam brush has a resin filter. It is
important to change this filter every 3 months
for the correct maintenance of the brush and
the anti-cal filtering system of the appliance.
FILLING WITH WATER:
You must fill the water compartment before
turning on the appliance.
Remove the water tank using the tank
opening.
Fill the deposit taking care to observe the MAX
level.
Put the tank back in place.
Downloaded by: pd-oliana on 11-08-2022 08:48 CEST