Taurus BACK EXTENSION IT95, Руководство пользователя

Страница: 25 / 34

STEP 5
1. Attach two 4.5" Pulleys (#21) to the Weight Stack Frame ASSY (#1) using:
two M10*50 SHCS (#40)
four Φ11*Φ20*2 Flat Washer (#49)
two M10 Nylon Lock Nut (#51)
2. Attach the Cable ASSY (#54) to the Top Plate (#14) and the Wheel Frame ASSY (#6)
using:
one Aluminium Sheath (#31)
one Plug (#33)
Note: Wrench tighten bolts and Nylon Lock Nuts.
Step 6
Tips: Pre-assemble eight M6*20 Cross Recessed Pan Head Screws into the Weight Stack
Frame ASSY and Bottom Bracket ASSY, not wrench tighten Bolts, Assemble the shroud
with the bolt on.
1. Attach the Front Shroud (#25) and the Right Front Shroud (#26) to the Weight Stack
Frame ASSY (#1) and the Bottom Bracket ASSY (#11) using:
four M6*20 CRPHS (#37)
two M6*16 CRPHS (#35)
2. Attach the Rear Shroud (#27) to the Weight Stack Frame ASSY (#1) and the Bottom
Bracket ASSY (#11) using:
four M6*20 CRPHS (#37)
two M6*16 CRPHS (#35)
3. Attach the Training Placard Cover (#17) to the Weight Stack Frame ASSY (#1) and the
Top Bracket ASSY (#10) using:
two M6*20 CRPHS (#37)
two M6*10 CRPHS (#36)
4. Attach the Top Rear Shroud (#18) to the Weight Stack Frame ASSY (#1) and the Top
Bracket ASSY (#10) using:
four M6*20 CRPHS (#37)
5. Attach the Top Cover (#16) to the Weight Stack Frame ASSY (#1) using:
two M6*20 CRPHS (#37)
two Spout Plug Φ16.5*6.88 (#32)
Assembly
25