The amplifier set up on a pedal-board:
What are the benefits?
There is no need for additional foot-switches to control the Stomp-Heads
functions, because they are all integrated into our compact amplifier.
However, if needed, our amp is also equipped with the option of controlling
all its features via an external controller
Much less humming and interference noises due to very short connections
There is no need for large amounts of long and heavy cable runs to
connect effect loops or amplifier switchers. As a result, when all external
wiring of the amp controller and FX Loop is eliminated, the whole guitar
sound system is extremely compact and light.
Connecting wires between the amplifier and the effects are much shorter
than in traditional set-ups, therefore problems related to loss of signal
quality are reduce (much less humming and interference).
Set up is extremely easy and takes just seconds. All you need to do is
connect the speaker cabinet, plug the power cable into the pedalboard,
and hook up your guitar. Three external wires - that’s all.
All the controls to precisely adjust the sound of the amp or effects are in
plain view on the pedalboard right in front of the guitarist. Therefore,
immediate adjustments can be done at any time, without lag.
The sound of your guitar can be precisely set at the exact spot on stage
where you play.
Stomp-Head offers a whole range of on-board sounds as a CLEAN,
CRUNCH, DRIVE and BOOST function. This eliminates the need for these
extra effects on your pedalboard, and creates more space for your other
stompboxes.