20
3 Installation / Commissioning
3.1 Scope of Delivery
(1)
C
ontrol
U
nit (
CU
)
(2)
O
perating
P
anel with hinged bracket (
OP
)
(3)
D
rive
U
nit Tauro 120, Taurox 300 / 400 / 900 (AE)
(4) Column with travel height adjustment
(5) Machine pedestal
•
Mains cable (2 m)
•
Motor power cable CU-DU (3 m)
•
Data cable CU-DU (3 m)
•
Data cable CU-OP (3 m)
•
Attachment Tauro 120: screw 3 pcs. M6x22; Washer 3 pcs Ø 6,4;
screw 2 pcs. M5x16
•
Attachment Taurox 300 / 400 / 900: screw 4 pcs. M8x35; Washer 3 pcs. Ø 8,4;
screw 2 pcs. M5x16; screw 2 pcs. M6x22
•
User manual
3.2 Mechanical installation
•
Verify if all parts of the delivery are available complete.
•
Before installing the machine verify if the machine or the accessories have transport
damages.
•
Verify if the installation underground is plane (installation surface).
•
Verify the minimum load capacity. (See chapter: „weight“)
•
Verify the operation conditions. (See chapter: „Operation conditions“)
•
Verify the electrical specification. (See chapter: „Electrical specification“)
•
Fix the machine pedestal (5) with 3 pieces
screws M12 on the installation surface.
(Dimensions see chapter: „Mechanical
dimensions “machine pedestal“)
5
A
Fig.: 3.1
•
Push the column (4.1) into the machine pedestal
(5).
•
Fix the screws (A) M10 with washer (B) with a
torque of 29 Nm.
•
Push the crank (4.4) of the column flange (4.2)
and clamp the screw (C).
5
4.1
4.4
C
A
B
4.2
Fig.: 3.2